Item Tag: Alphacool

Alphacool Eisdecke D5 Pump Top V.3, Plexi (Acrylic), Pump Not Included

Alphacools top for Laing D5 is now a member of the Eisdecke series and receives an update. For years now this top is already a measure. Again and again, small improvements have been made. The second major update differs both, visually and technically in a few details. The principle: On the bottom there is space for the Laing D5 or VPP655 pump and in the front or on top the inlet and outlet. For even more flexibility, the Eisdecke gets three inlets and two outlets. Another feature is the new holder to give the entire unit a stable footing and complete the overall visual image. Optional installation in 3.5 “drive bay is possible. The top can be converted by using the suplementary element, whitch is given as an accessory, to an complete reservoir which has also been revised.

Alphacool Eisstation VPP – Solo Reservoir, D5 (Pump Not Included)

With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available. The cap is made of sturdy NylonThree versions for all current pumpsNumerous mounting optionsIlluminated logo and LED mounting options Mounting possibilities:The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport. Connection possibilities:There are four possibilities for connection. An IN and an OuT with G1/4 threads are located on the top, with the illuminated logo. The logo’s colour can be changed with the optional modding kit. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below. Dimensions (LxWxH): 102 x 82 x 105mmCapacity: 250mlMaterial: Nylon / PMMAIn / Out: G1/4″Connections: 3x G1/4″ and 1x G3/8″Power connection LED Logo: 3 PinLighting modules: 4x for 5mm LED’sScope of Delivery

Alphacool ES 4U Reservoir with D5 Top (Pump Not Included)

The Alphacool ES 4u Reservoir with D5 top is a development for the Enterprise Solutions series. It has an integrated pump top for powerful D5 pumps. The combination of pump top and reservoir was designed to be mounted directly in the front of 4u servers. The positioning of the reservoir in the enclosure and the acrylic cover used to make maintenance and control of the water circuit much easier. The ES 4u Reservoir has a total of 3 inlets and one outlet. All connections use a G1/4″ thread. 2 inputs are located on the acrylic cover in the front range. The reservoir can be perfectly filled or emptied via these inputs. The input and the output for integrating the reservoir into the water circuit are located on the back. The ES Reservoir is mounted in front of a 4u server rack. The acrylic cover allows visual control of the water cooling level. The G1/4″ inlets in the cover allow easy filling, draining, and venting of the water circuit. The ES 4u Reservoir has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring, and all screws are included in the scope of delivery. Technical data L x W x H121.6 x 101.2 x 70 mm Pump compatibilityD5 Material housingacetal Material coveracrylic Connection4x G1/4″ internal thread Maximum working temperature60 C Pressure tested0.8 Bar Colorblack

Alphacool Eisstation 80 DC-LT Pump Top and Reservoir, Pump Not Included

The Eisstation DC-LT Solo Top from the Enterprise Solutions series is an extremely compact pump top and is very powerful together with the DC-LT pump. It shows its strengths wherever space is at a premium or where a pump needs to be accommodated in a space-saving manner. The Top is compatible with the DC-LT pump series and is also well suited for small water cooling systems including 1u server racks. If the upper aluminium plate (don’t worry, this doesn’t touch fluid) is removed, the top can also be extended with a reservoir. under the plate there is also a bubble down filter which minimizes the suction of air bubbles. The Eisstation 80 DC-LT of the Enterprise Solutions series, on the other hand, still fits into 2u server racks, depending on the installation method. The entire Eisstation is made of acetal and is therefore extremely resistant and durable. As with the Solo Top, a Velcro mat is included with which the Eisstation can be mounted without losing its compact design. In contrast to the other Eisstation, mounting feet are included to adjust the height. Mounting at an angle of 30 degrees or 90 degrees is also possible. The volume can be reduced by using the enclosed decoupling feet. The installation of the pump is the same as with the other two items. Only the filling is easier, because through the 25mm large filling opening, spray bottles or funnels can be used easily. Eisstation 80 DC-LT Scope of delivery: 1x Reservoir1x Screw plug G1/4″1x Screw plug G1″2x M3x8 screws8x M4x6 screws2x M3x5 screws1x Screw plugs – Tool1x Hexagon key1x Velcro mat2x Feet4x M4 nuts4x vibration damperTechnical Data: Dimensions: 50.62 x 50.62 x 77 mm (W x D x H)Net weight: 144 gMaximum working temperature: 60 °CConnections: 3x G1/4″Pressure tested: 1,5 BarCertificates: CE, FC, ROHS

Alphacool Eisstation 40 DC-LT Pump Top and Reservoir, Pump Not Included

The Eisstation DC-LT Solo Top from the Enterprise Solutions series is an extremely compact pump top and is very powerful together with the DC-LT pump. It shows its strengths wherever space is at a premium or where a pump needs to be accommodated in a space-saving manner. The Top is compatible with the DC-LT pump series and is also well suited for small water cooling systems including 1U server racks. If the upper aluminium plate (don’t worry, this doesn’t touch fluid) is removed, the top can also be extended with a reservoir. Under the plate there is also a bubble down filter which minimizes the suction of air bubbles. The Eisstation 40 DC-LT of the Enterprise Solutions series corresponds to the above Solo Top and is therefore also extremely compact. This however comes with a reservoir. It also fits into 1U server racks but can also be mounted directly on a radiator. Together the Solo Top and reservoir are only 6 cm long, 4 cm wide and 4.1 cm high. That’s why it also fits on a 40 mm Alphacool X-Flow NexXxoS radiator. Despite its size, just under 30 ml of coolant still fits inside and since it can be connected directly to a radiator, it too acts as a reservoir. As with the Solo Top, the filter prevents air bubbles from entering the pump. The included double nipple allows the Eisstation to be connected directly to one of the four G1/4″ threads at the side or front entrance of the radiator. The Eisstation, together with a NexXxoS 40 mm X-Flow radiator fits easily into a 1U server housing. Eisstation 40 DC-LT Scope of delivery: 1x Pump top3x Stop Fitting2x M3x8 screws1x Stop Fitting – Tool1x Hexagon key1x Adapter (2x G1/4″ external thread, rotatable) Technical Data: Dimensions: 60 x 40 x 40,48 mm (W x D x H)Net weight: 61 g Maximum working temperature: 60 °C Connections: 5x G1/4″ Pressure tested: 1.5 Bar Certificates: CE, FC, ROHS

Alphacool Eisdecke D5 Pump Top V.3, Acetal, Pump Not Included

Alphacools top for Laing D5 is now a member of the Eisdecke series and receives an update. For years now this top is already a measure. Again and again, small improvements have been made. The second major update differs both, visually and technically in a few details. The principle: On the bottom there is space for the Laing D5 or VPP655 pump and in the front or on top the inlet and outlet. For even more flexibility, the Eisdecke gets three inlets and two outlets. Another feature is the new holder to give the entire unit a stable footing and complete the overall visual image. Optional installation in 3.5 “drive bay is possible. The top can be converted by using the suplementary element, whitch is given as an accessory, to an complete reservoir which has also been revised.